OPTICS CRYSTALS LASERS
   
 
Cylinder Lenses

MATERIAL - FS (Fused Silica)



Crystaltechno LTD makes cylindrical lenses from different types of optical crystals and glasses.

Design (convex, concave, round, rectangular ) - according customers' needs Cylindrical lenses are used as transfer optics and output optics to avoid the spherical aberrations if needed.
PARAMETER VALUE
 
  Surface figure   3 Lambda at 633 nm per inch  
  Scratch-Dig   60 - 40  
  Diameter tolerance   ± 0.1 mm  
  Paraxial Focal Length Tolerance   ± 2%  
  Centration   less than 5 arc minutes  
  Clear aperture   90 %  
  Bevels   (0.2+0.3) mm x 45°  

D, mm FLx, mm R, mm tc, mm temin, mm Part Number
 
  12,7   25,0   11,25   4,0   2,0   CCX8-01  
  12,7   50,0   22,50   2,9   2,0   CCX8-02  
  25,4   50,0   22,50   5,9   2,0   CCX8-03  
  25,4   75,0   33,75   4,5   2,0   CCX8-04  
  25,4   100,0   45,00   3,8   2,0   CCX8-05  
  25,4   150,0   67,50   3,2   2,0   CCX8-06  
  25,4   200,0   90,00   2,9   2,0   CCX8-07  
  25,4   250,0   112,50   2,7   2,0   CCX8-08  
  50,8   100,0   45,00   10,9   3,0   CCX8-09  
  50,8   150,0   67,50   8,0   3,0   CCX8-10  
  50,8   200,0   90,00   6,7   3,0   CCX8-11  
  50,8   250,0   112,50   5,9   3,0   CCX8-12  
  50,8   500,0   225,00   4,4   3,0   CCX8-13  

* Numerical parameters correspond to Lambda = 1.06 µm (n=1.45).

 



 
 
 
CaF2
BaF2
MgF2
FS
BK7
Si
Ge
ZnSe

Ordering Info

 
  (c) Crystaltechno Ltd. Vernadskogo 113-106, Moscow 119571, Russia
+7 (495) 234-5951, 234-5952, 956-7610
fax +7 (495) 433-1551
sales@crystaltechno.com
Site suggestions: webmaster@crystaltechno.com
Design by asp.