OPTICS CRYSTALS LASERS
   
 
ZnSe Cylindrical Plano-Convex Lenses

MATERIAL - ZnSe (Zinc Selenide) CVD



Crystaltechno Ltd. manufactures cylindrical lenses from CVD ZnSe (Zinc Selenide) material as well as from fused silica, glass and different types of optical crystals.

CVD ZnSe (Zinc Selenide) cylindrical plano-convex lenses are widely used as focusing transfer optics for infrared IR applications including CO2 laser optics.

We offer ZnSe plano-convex cylindrical lenses with round and rectangular design (according to customer's specification).

AR/AR coating of CVD ZnSe plano-convex cylindrical lenses both for one wavelength (10.6 microns or another) and for the infrared IR spectral range (3-12) microns is available.

Perhaps you will find the required Zinc Selenide (CVD ZnSe) lenses and other ZnSe optics ZnSe optics at our stock, please see item Optical Crystals.

CVD ZnSe CYLINDRICAL LENS PARAMETER VALUE
 
  Surface figure   3 Lambda at 633 nm per inch  
  Scratch-Dig   60 - 40  
  Diameter tolerance   +/- 0.1 mm  
  Paraxial Focal Length Tolerance   +/- 2%  
  Centration   less than 5 arc minutes  
  Clear aperture   90 %  
  Bevels   (0.2+0.3) mm x 45 arc degrees  

ZnSe Lens
Diameter
D, mm
Focal Length
FLx, mm
Radius of
Curvature
R, mm
ZnSe Lens
Center
Thickness
tc, mm
ZnSe Lens
Edge
Thickness
te, mm
Part Number
 
  12,7   25,0   35,0   2,6   2,0   CCX17-01  
  12,7   50,0   70,0   2,3   2,0   CCX17-02  
  25,4   25,0   35,0   4,4   2,0   CCX17-03  
  25,4   50,0   70,0   3,2   2,0   CCX17-04  
  25,4   75,0   105,0   2,8   2,0   CCX17-05  
  25,4   100,0   140,0   2,6   2,0   CCX17-06  
  25,4   150,0   210,0   2,4   2,0   CCX17-07  
  25,4   200,0   280,0   2,3   2,0   CCX17-08  
  25,4   250,0   350,0   2,2   3,0   CCX17-09  
  50,8   50,0   70,0   7,8   3,0   CCX17-10  
  50,8   100,0   140,0   5,3   3,0   CCX17-11  
  50,8   150,0   210,0   4,5   3,0   CCX17-12  
  50,8   200,0   280,0   4,2   3,0   CCX17-13  
  50,8   250,0   350,0   3,9   3,0   CCX17-14  
  50,8   500,0   700,0   3,5   3,0   CCX17-15  

* Numerical parameters correspond to Lambda=10.6 microns (n=2.4).

We produce ZnSe cylindrical lenses from CVD grown ZnSe laser grade material. Basic characteristics of CVD ZnSe (Zinc Selenide) laser grade material: grain size (50 - 70) microns; index of absorption 0.0005 (1/cm) at 10.6 microns, transparency in spectral range ( 0.5- 20) microns,

Because of high refractive index (n = 2.4 at 10.6 microns), Fresnel losses of Zinc Selenide polished surface are equal 17 % (at one side), thus the transmission of Zinc Selenide polished lens equals 68.9% at 10.6 micron. We offer two sides antireflection (AR/AR) coating both for one wavelength (10.6 microns or another) and for the spectral range (3-12) microns. Transmission of AR/AR coated ZnSe CVD lenses - up to 99%.

You can see spectral transmittance of ZnSe window (thickness 10 mm).

Please contact us for ZnSe cylindrical lenses pricing.

Perhaps you will find required ZnSe (Zinc Selenide) lenses and other Zinc Selenide optics at our stock, please see item Optical Crystals.

 



 
 
 
CaF2
BaF2
MgF2
FS
BK7
Si
Ge
ZnSe

Ordering Info

 
  (c) Crystaltechno Ltd. Vernadskogo 113-106, Moscow 119571, Russia
+7 (495) 234-5951, 234-5952, 956-7610
fax +7 (495) 433-1551
sales@crystaltechno.com
Site suggestions: webmaster@crystaltechno.com